Today, another milestone: the hob and the oven installed. That needed some major engineer Jansen engineering, as the oven is 58 cm deep, but the worktop of the kitchen is only 61 cm. (Never noticed that when viewing the house.) The socket for the oven is behind it, and so is the gas connection for the hob. So, the oven needs to be installed a bit further into the kitchen than planned. And there must be room for the gas hose behind the oven.
Then the electricity socket broke off its screws, bad plastic. But some tape and a few rings fix anything. NASA should hire me.
The hob is installed as should be, the oven is still provisionally installed, sitting on a few bits of wood, as it needs to be placed so that it does not touch the gas hose.
Another oven day for engineer Jansen. Now installed in its final place. It needs some extra panels to hide that the oven is a bit more to the front. It cannot go further back, the plug and socket arebin the way. The gas conduit has been tied to the wall, so does not touch the oven. (The oven casing does not get hot anyway)
This house has propane gas, the old house has butane bottles. Fortunately that seems compatible, no adjustment necessary.
No comments:
Post a Comment